Publications

Book Chapters
1. R. Kale and R. Banerjee, “Spray collapse in a multi-hole gdi injector and its effect on in-cylinder combustion,” in Two-Phase Flow for Automotive and Power Generation Sectors, K. Saha, A. K. Agarwal, K. Ghosh, and S. Som, Eds. Springer, Singapore, 2019, pp. 43–61.
2. G. S. Reddy and R. Banerjee, “Evaluation of Forcing Schemes in Pseudopotential Based Multiphase Lattice Boltzmann Model,” in Fluid Mechanics and Fluid Power–Contemporary Research, A. Saha, D. Das, R. Srivastava, P. Panigrahi, and K. Muralidhar, Eds. Springer, New Delhi, 2017, pp. 1003–1010.

Journals
1. Sriramoju, S.K., Kumar, D., Majumdar, S., Dash, P.S., Shee, D. & Banerjee, R. Sustainability of coal mines: Separation of clean coal from the fine-coal rejects by ultra-fine grinding and density-gradient-centrifugation. Powder Technol. 383, 356–370 (2021).
2. Wakale, A. B., Banerjee, S. & Banerjee, R. Estimation of NOx and soot emission from a constant volume n-butanol/n-dodecane blended spray using unsteady flamelet model based on n-dodecane/n-butanol/NOx/PAH chemistry. J. Energy Inst. 93, 1868–1882 (2020).
3. Saleem, A., Farooq, S., Karimi, I. A. & Banerjee, R. Wall superheat at the incipient nucleate boiling condition for natural and forced convection: A CFD approach. Comput. Chem. Eng. 134, 106718 (2020).
4. Saleem, A., Farooq, S., Karimi, I. A. & Banerjee, R. CFD Analysis of Stratification and Rollover Phenomena in an Industrial-Scale LNG Storage Tank. Ind. Eng. Chem. Res. 59, 14126–14144 (2020).
5. Saritha, G. & Banerjee, R. Bubble dynamics of a pressure-driven cavitating flow in a micro-scale channel using a high density pseudo-potential Lattice Boltzmann method. Heat Transf. Eng. 41, 622–636 (2020).
6. Kale, R. & Banerjee, R. Optical investigation of flash boiling and its effect on in-cylinder combustion for butanol isomers and iso-octane. Int. J. Engine Res. (in press), (2020).
7. Kumar, M., Reddy, R., Banerjee, R. & Mangadoddy, N. Effect of particle concentration on turbulent modulation inside hydrocyclone using coupled MPPIC-VOF method. Sep. Purif. Technol. 118206 (2020).
8. Golla, S. T., Mayur, K., Venkatesham, B. & Banerjee, R. Experimental study of sloshing noise in a partially filled rectangular tank under periodic excitation. Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 233, 2891–2902 (2019).
9. Kale, R. & Banerjee, R. Understanding spray and atomization characteristics of butanol isomers and isooctane under engine like hot injector body conditions. Fuel 237, 191–201 (2019).
10. Saritha, G. & Banerjee, R. Development and application of a high density ratio pseudopotential based two-phase LBM solver to study cavitating bubble dynamics in pressure driven channel flow at low Reynolds number. Eur. J. Mech. 75, 83–96 (2019).
Biswal, A., Kale, R., Balusamy, S., Banerjee, R. & Kolhe, P. Lemon peel oil as an alternative fuel for GDI engines: A spray characterization perspective. Renew. energy 142, 249–263 (2019).
11. Kale, R. & Banerjee, R. Experimental investigation on GDI spray behavior of isooctane and alcohols at elevated pressure and temperature conditions. Fuel 236, 1–12 (2019).
12. Wakale, A. B., Banerjee, S. & Banerjee, R. Experimental and chemical kinetic study of the impact of n-butanol blending on the gross engine performance of a CRDI engine. Energy Convers. Manag. 178, 400–414 (2018).
13. Saleem, A., Farooq, S., Karimi, I. A. & Banerjee, R. CFD simulation of a full scale LNG storage tank. in Computer Aided Chemical Engineering vol. 44 883–888 (Elsevier, 2018).
14. Saleem, A., Farooq, S., Karimi, I. A. & Banerjee, R. A CFD simulation study of boiling mechanism and BOG generation in a full-scale LNG storage tank. Comput. Chem. Eng. 115, 112–120 (2018).
15. Agawane, G., Jadon, V., Balide, V. & Banerjee, R. An experimental study of sloshing noise in a partially filled rectangular tank. SAE Int. J. Passeng. Cars-Mechanical Syst. 10, 391–400 (2017).
16. Banerjee, R. & Saritha, G. Numerical Study of Cavitation and Bubble Growth Using a High Density Ratio Pseudo-potential Lattice Boltzmann Method. ISME J. Thermofluids 3, 40–54 (2017).
17. Reddy, R. & Banerjee, R. Direct Simulations of Liquid Sheet Breakup in Planar Gas Blast Atomization. At. Sprays 27, 95–116 (2017).
18. Banerjee, R. & Kumar, S. Numerical investigation of stratified air/fuel preparation in a GDI engine. Appl. Therm. Eng. 104, 414–428 (2016).
19. Reddy, R. & Banerjee, R. Study of disintegration of a high speed liquid jet using VOF method. Procedia IUTAM 15, 305–312 (2015).
20. Reddy, R. & Banerjee, R. GPU accelerated VOF based multiphase flow solver and its application to sprays. Comput. Fluids 117, 287–303 (2015).
21. Banerjee, R. Numerical investigation of evaporation of a single ethanol/iso-octane droplet. Fuel 107, 724–739 (2013).
22. Banerjee, R. Turbulent conjugate heat and mass transfer from the surface of a binary mixture of ethanol/iso-octane in a countercurrent stratified two-phase flow system. Int. J. Heat Mass Transf. 51, 5958–5974 (2008).
23. Banerjee, R. A Numerical Study of Combined Heat and Mass Transfer in an Inclined Channel Using the VOF Multiphase Model. Numer. Heat Transf. Part A 52, 163–183 (2007).
24. Banerjee, R. & Isaac, K. M. A study to determine vapor generation from the surface of gasoline flowing in an inclined channel using a continuous thermodynamics approach. Numer. Heat Transf. Part A Appl. 50, 705–729 (2006).
25. Banerjee, R. & Isaac, K. M. An algorithm to determine the mass transfer rate from a pure liquid surface using the volume of fluid multiphase model. Int. J. Engine Res. 5, 23–37 (2004).
26. Banerjee, R., Isaac, K. M., Oliver, L. & Breig, W. Features of automotive gas tank filler pipe two-phase flow: Experiments and computational fluid dynamics simulations. J. Eng. Gas Turbines Power 124, 412–420 (2002).
27. Banerjee, R., Bai, X., Pugh, D., Isaac, K M., Klein, D., Edson, J., Breig, W. & Oliver, L. CFD simulations of critical components in fuel filling systems. SAE Trans. 324–340 (2002).

Conference Proceedings
1. Michael, E. et al. Effect of liquid/gas density ratio on primary jet breakup of pressure swirl atomizer: experimental & numerical study. in Proceedings of the ASME 2019 Gas Turbine India, GTIndia2019 (2019).
2. Wakale, A. B. et al. An Experimental and Numerical Study of N-Dodecane/Butanol Blends for Compression Ignition Engines. in SAE Technical Paper 2018-01-0240 (SAE International, 2018).
3. Kale, R. & Banerjee, R. Investigation of macroscopic as well as microscopic spray behavior of multi-hole GDI injector under engine like hot injector body conditions. in SAE Technical Paper 2018-01-0280 (SAE International, 2018). doi:10.4271/2018-01-0280.
4. Michael, E., Keerthi, S. K. & Banerjee, R. Experimental and numerical study of flow characteristics in like-doublets. in Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP) (2018).
5. Kale, R. & Banerjee, R. Influence of engine like conditions on macroscopic as well as microscopic spray behavior of GDI injector using isooctane and alcohols. in SAE Technical Paper 2017-01-0885 (SAE Technical Paper, 2017).
6. Saritha, G. & Banerjee, R. Numerical simulation of bubble nucleation and growth using Lattice Boltzmann Method. in Proceedings of the 24 th National and 2 nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) IHMTC2017-09–1457 (2017).
7. Miriyala, S., Jadhav, P., Banerjee, R. & Mitra, K. Surrogate based optimization of CFD model simulating supersonic flow of missile body under uncertainty using artificial neural network. in Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT2017). 2017 (2017).
8. Wakale, A. B., Kaira, S. & Banerjee, R. Numerical simulation of split-injection using 105 species based n-dodecane chemical kinetic flamelet model for direct injection CI engine. in Proceedings of the 24 th National and 2 nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) IHMTC2017-04–1214 (Begel House Inc., 2017).
9. Kaira, S. S., Wakale, A. B. & Banerjee, R. CFD Modeling of Non-premixed Combustion Inside a Diesel Engine. in Proceedings of the 24 th National and 2 nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) IHMTC2017-04–0498 (Begel House Inc., 2017).
11. Jadhav, P., Miriyala, S., Mitra, K. & Banerjee, R. Uncertainty estimations in external flow using Computational Fluid Dynamics (CFD). in Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT2017) (2017).
12. Kale, R. & Banerjee, R. Experimental investigation of abnormal combustion (knocking) in SI engine using GDI strategy. in Proceedings of the 24 th National and 2 nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) IHMTC2017-04–0140 (2017).
13. Mayank, K., Banerjee, R. & Mangadoddy, N. Development of GPU parallel multiphase flow solver for turbulent slurry flows in cyclone. in 12th International Conference on CFD in Oil & Gas, Metallurgical and Process Industries (SINTEF Academic Press, 2017).
14. Kale, R. & Banerjee, R. Liquid and Vapour Penetration Length Estimation for GDI Spray of Iso-octane and Alcohols at Elevated Pressure and Temperature Conditions. in 18th Annual Conference on Liquid Atomization and Spray Systems - Asia (2016).
15. Jaiswal, S. et al. An efficient GPU Parallelization for arbitrary collocated polyhedral finite volume grids and its application to incompressible fluid flows. in 2016 IEEE 23rd International Conference on High Performance Computing Workshops (HiPCW) 81–89 (IEEE, 2016).
16. Kothari, M., Jadhav, A., Venkatesham, B. & Banerjee, R. Experimental and numerical modal analysis to investigate the effect of fluid fill level on sloshing frequency and structural natural frequency of a rectangular tank. in National Symposium on Acoustics NSA-2016 (2016).
17. Sarang, H., Reddy, S. R., Jaiswal, S. & Banerjee, R. High fidelity simulations of binary collisions of liquid drops. in 18th Annual Conference on Liquid Atomization and Spray Systems - Asia (2016).
18. Anurag, A., Kale, R. & Banerjee, R. Spray Characterisation for Iso-octane and n-butanol Blends at Elevated Pressure and Temperature Conditions. in 24th National Conference of IC Engines and Combustion (2015).
19. Tej, K. R., Sivadasan, N., Sharma, V. & Banerjee, R. Parallel AMG solver for three dimensional unstructured grids using GPU. in 2014 21st International Conference on High Performance Computing (HiPC) 1–10 (IEEE, 2014).
20. Jadon, V. et al. An experimental and multiphysics based numerical study to predict automotive fuel tank sloshing noise. in SAE Technical Paper 2014-01-0888 (SAE Technical Paper, 2014).
21. Reddy, R. & Banerjee, R. Simulation of a gas blasted liquid sheet on GPU architecture. in 26th Annual Conference on Liquid Atomization and Spray Systems - Europe (2014).
22. Reddy, S. R., Sebastian, J., Miyyadad, S. M., Banerjee, R. & Sivadasan, N. Single and two phase flow CFD solvers using GPU. in 2013 National Conference on Parallel Computing Technologies (PARCOMPTECH) 1–8 (IEEE, 2013).
23. Rangarajan, A. M. & Banerjee, R. Numerical investigation of in-cylinder fuel atomization and mixing for a GDI engine. in Proceeding of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference (2013).
24. Banerjee, R. & Gopinath, R. Numerical study of heat and mass transfer in evaporating multiple droplets composed of binary mixture of ethanol and iso-octane. in Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition. Volume 7: Fluids and Heat Transfer, Parts A, B, C, and D 449–461 (American Society of Mechanical Engineers, 2012).
25. Reddy, S. R., Sebastian, J., Miyyadad, S. M., Banerjee, R. & Sivadasan, N. VOF based two-phase flow solver on GPU architecture. in International Congress on Computational Mechanics and Simulation (ICCMS) vol. 52 (2012).
26. Banerjee, R. & Gopinath, R. CFD analysis to study evaporation of a single ethanol/iso-octane binary mixture droplet. in Proceedings of the ASME-JSME-KSME 2011 Joint Fluids Engineering Conference. ASME-JSME-KSME 2011 Joint Fluids Engineering Conference: Volume 1, Symposia – Parts A, B, C, and D 2571–2578 (2011).
27. Banerjee, R., Burke, C. & Gepper, D. Experimental and numerical study of gasoline refueling nozzle spray pattern. in SAE Technical Paper 2007-01-1400 (SAE Technical Paper, 2007).
28. Lalkoshti, P., Banerjee, R., Tarafder, A. & Sarangi, S. K. CRYOFLUIDS—A Software for Physical Property Data of Cryogenic Fluids. in Proceedings of the Twentieth International Cryogenic Engineering Conference (ICEC20) 903–909 (Elsevier, 2005).
29. Bai, X. et al. Modeling and simulation of n-butane adsorption/desorption in a carbon canister. in SAE Technical Paper 2004-01-1680 (SAE Technical Paper, 2004).
30. Banerjee, R. & Isaac, K. M. Evaluation of turbulence closure schemes for stratified two phase flow. in Proceedings of the ASME 2003 International Mechanical Engineering Congress and Exposition. Fluids Engineering. Washington 689–705 (2003).
31. Bai, X. et al. Multidimensional, time-accurate CFD simulation of adsorption/desorption in a carbon canister. in SAE Technical Paper 2003-01-1003 (SAE Technical Paper, 2003).
32. Banerjee, R. & Isaac, K. M. An algorithm to determine mass transfer rate from a liquid surface using VOF model. in Proceedings of the 2nd US Sections Joint Meeting of the Combustion Institute, March (2001).

Patents
1. Santosh Kumar Sriramoju, Pratik Swarup Dash, Raja Banerjee, Saptarshi Majumdar and Debaprasad Shee, A system and process for segregation of low ash clean coal from coal tailing, Indian Patent (Appl. no: 202031005007 dated 05/02/2020)
2. Raja Banerjee and Darrell L. Klein, Fuel Fill System with Fuel Vapor Recirculation, US Patent # 7,243,678 issued 17/07/2007 (assigned to Dayco Products, LLC)