Current Ph.D. Research Scholars

Mr Ankur Srivastava

Email: ms24resch11009@iith.ac.in

Research Topic: TO BE DECIDED

linked In
ankur

Mr Arun Kumar J S

Email: id24resch11014@iith.ac.in

Research Topic: Electrochemical Detection of Contaminants of Emerging Concern (CECs)

arun

Ms Nehal Patel

Email: cc24resch11001@iith.ac.in

Research Topic: Metal recovery using Microbial Fuel Cell

linked In

nehal

Ms Yuva Keerthana R

External Ph. D. Scholar

Email: ms24resch04002@iith.ac.in

Research Topic: Research topic: Development of anode materials for sodium-ion batteries.

linked In

yuva

Ms Neha Mishra

Email: id22resch11012@iith.ac.in

Research Topic: Nano high entropy catalysts for Hydrogen evolution reaction

linked In

neha

Postdoctoral Alumni

Dr. Chokkakula L. P. Pavithra

SERB National Post-Doctoral Fellow
Email: chlppavithra@iith.ac.in

Research Topic: Electrochemical synthesis of multi-component alloy coatings, Synthesis and characterization of novel materials using combinatorial approach by electrodeposition

Current Position: Research Associate-III at IIT Hyderabad.

Google Scholar link
pavitra

Dr. Rengasamy Dhanabal

CSIR Research associate
Email: dhanabal.r@msme.iith.ac.in

Research Topic: EDevelopment of new efficient nano materials and pervoksites solar cells devices

Current Position: Faculty on Contract, (Physics), National Institute of Technology, Puducherry, Pondicherry.

Linked In
dhanabal

Graduated Research Scholars

Dr Kannan P.K.

Email: ms13p1002@iith.ac.in

Research Topic: Development of vacuum-based CZTS/Se thin films for solar photovoltaic applications

* SERB-Purdue University Overseas Visiting Doctoral Fellowship 2018 from Department of Science and Technology (DST), India to spend one year at Professor Rakesh Agrawal's (Purdue University, USA) laboratory.

Google Scholar link
Kannan P.K.

Dr Brijesh Singh Yadav (External Ph. D. Research Scholar)

External Research Scholar from ARCI-Hyderabad.

Email: ms15resch11001@iith.ac.in

Research Topic: Investigation of CIGS thin film absorber layer by inkjet printing for solar photovoltaic applications

Google Scholar link
Brijesh singh

Dr Rameez Rajmahammad Tamboli

Email: ms14m16p000002@iith.ac.in

Research Topic: Role of Aluminium addition in high strength interstitial free (IFHS) steel

Google Scholar link
Rameez Tamboli

Dr Madhuri Kukkuadapu

DST-INSPIRE Fellow

Email: ms16resch11005@iith.ac.in

Research Topic: Enhancement of efficiency through modification of CIGS absorber layer by non vacuum route for solar cell applications

Google Scholar link
MAdhuri Kukkuadapu

Dr Siri Kiran Reddy

Email: sirikiran.reddy@alumni.iith.ac.in

Research Topic: Electrodeposition of high entropy alloys

Current position: R&D Manager @ Reliance Industries Limited

Google Scholar link
Siri Kiran Reddy

Dr. Mandati Sreekanth

Research Topic: Fabrication of CuInSe2 and Cu(In,Ga)Se2 absorber layers by pulse and pulse-reverse electrochemical techniques for solar photovoltaic applications;

Successfully defended on 18th December 2015

*Received INAE Innovative Students Projects Awards 2015
*Received Dr. K.V. Rao Scientific Society Young Scientist Award of citation 2014-15 in Chemistry.
*Bhaskara Advanced Solar Energy (BASE) Internship 2014 from Department of Science and Technology (DST), India and the Indo-U.S. Science and Technology Forum (IUSSTF) to spend six months at Professor Rakesh Agarwal's (Purdue University, USA) laboratory.
*Received Best Poster Presentation Prize from his Ph.D. research work at 3rd EICOON School on "Science and Technology of renewable and Clean Energy Sources, held in Kolkata, India, 30th April-1st May 2012

Current Position: Research Scientist at ARCI, Hyderabad.

Google Scholar link
Sreekanth Mandati

Dr. Palli Srinivas

Research Topic: Theoretical and experimental studies of single metals (Cu and Ni) and binary Ni-Cu alloy electrodeposition in a modified Hull cell: A combinatorial approach;

Successfully defended on 18th December 2015

* Received Best Oral Paper Award for presenting "Development of Ni-Cu Materials Libraries by using Combinatorial Pulsed Electrodeposition" at ISRS 2012, IIT Madras, 13-15 December 2012
* Received Best Oral Paper Award for presenting "Experimental and Theoretical Study of Electrodeposition of Binary Ni-Cu Thin Film library" at COMBI14, Cairns, Australia, 6-8 October 2014

Current Position:Post Doctoral Fellow at IIT Bombay (2 years)

Google Scholar link
Palli Srinivas

Dr. Karre Rajamallu

Research Topic: Design and development of β Ti alloys for through first principles calculations and powder metallurgy route for biomedical applications.

Successfully defended on 28th April 2018

*Visited Ritsumeikan University twice for doing partial work under Indo-Japan Collaboration and JASSO fellowship
*Earlier Research Associate at IIT Hyderabad (6 months)

Current Position: Post Doctoral Fellow at Shanghai Jiao Tong University, Shanghai, China.

Google Scholar link
Karre Rajamallu

Dr. Sushmita Chaudhari

Research Topic: Dip coating of Cu2ZnSn(SxSe1-x)4 Absorber Layer for Solar Photovoltaic Applications.

Successfully defended on 24th April 2018

Google Scholar link
Sushmita Chaudhari

Dr. Basanth Kumar K

Research Topic: Thermomechanical Processing, Microstructure and Texture Studies of TiHy 600 Alloy (a Near Alpha Titanium Alloy)).

Successfully defended on 4th September 2018

* Received Best Oral Paper Award for presenting "Peak stress studies of hot compressed TiHy 600 alloy" at International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016), Hyderabad, 7-9 July 2016.

Current Position:Assistant Professor at Vardhaman College Hyderabad.

Researchgate link
Basanth Kumar K

Graduated M.Tech Students

Mr Subhajit Das(2023-2025)

Email: gs23mtech11110@iith.ac.in

Research Topic:Development of Novel Transition Metal Based High Entropy Oxide for Electrochemical Water Splitting.

Linked In
subhajit

Mr. Shubham Sharma (2021- 2023)

Email: sharma98shubham@gmail.com

Research Topic:Recovery of precious and critical materials from solar interconnects

Current position:Assistant Manager(Sustainability) in Greenko Groups

Linked In
subhajit

Mr. Rajesh Kumar(2020)

Email: rajeshkr@alumni.iith.ac.in

Research Topic:Selective recovery of metals from spent lithium ion batteries.

Current position:Junior Process Engineer at MiniMines Cleantech Solutions Pvt. Ltd. Bengaluru

rajesh
Mr Yaswanth R(2020)

Email: ms20mtech14003@iith.ac.in

Research Topic:Synthesis of mdulated high entropy alloys nanowires by electrochemical approach.
yaswanth
Mr Ashutosh Singh

Email: ms19mtech11005@iith.ac.in

Research Topic:Electrochemical synthesis of one-dimensional multicomponent alloys.
dinesh
Mr Vinay Periwal (2018-2020)

Email: ms18mtech11008@iith.ac.in

Research Topic: Electrochemical Synthesis of Graphene-reinforced alloys and its Applications.
dinesh
Mr Dinesh Choudhary (2017-2019)

Email: ms17mtech11001@iith.ac.in

Research Topic: Dip coating of Cu2ZnSnS4 on Flexible Mo foil and its Flexibility measurements
dinesh

Mr Harendra Kumar (2016-2018)

Email: ms16mtech11005@iith.ac.in

Research Topic: Development of beta Ti-Nb-X(Zr, Sn) alloys through powder metallurgy for biomedical applications
Harendra Kumar

Mr Rameez Rajmahammad Tamboli (2014-2016)

Email: ms14mtech11008@iith.ac.in

Research Topic: Friction Stir Welding of D6AC Alloy Steel to Ti-6Al-4V and its Joint Analyses
Sushil Yebaji

Mr Sushil Yebaji (2013-2015)

Email: ms13m1008@iith.ac.in

Research Topic: Microstructural studies of High Pressure Torsion Titanium alloy
Sushil Yebaji

Mr Jogi Tushar Duryodhanrao (2012-2014)

Email: ms12m1003@iith.ac.in

Research Topic: Development of Metal-Ceramic Thermoelectrics
Jogi Tushar Duryodhanrao

Mr Manish Meshram (2012-2014)

Email: ms12m1007@iith.ac.in

Research Topic: Friction stir welding of austenitic steel with zircaloy and its joint analyses
Manish Meshram

Mr Bhupendra Sharma (2011-2013)

Email: ms11m01@iith.ac.in

Research Topic: Annealing Effect on Accumulative Roll Bonded Aluminium
Bhupendra Sharma

Mr Pankaj Sahlot (2010-2012)

Email: ms10m03@iith.ac.in

Research Topic: Feasibility studies of joining titanium alloys using friction stir welding
* Received First Prize in Poster Presentation from his Master Thesis work at DMAT-2012, IT Banaras Hindu University, January 23-24, 2012
Pankaj Sahlot

Mr Sajin George Sajan (2010-2012)

Email: ms10m05@iith.ac.in

Research Topic: Feasibility studies of joining steel and titanium alloys using friction stir welding
Sajin George Sajan