|
K. Venkatasubbaiah
Professor, Department of Mechanical and Aerospace Engineering, Indian Institute of Technology Hyderabad. |
About Research Publications Recognition Teaching IITH MAE Dept
Current Students
PhD Students
| Name | Thesis Topic/Title | Status |
|---|---|---|
| Koneti Leelasagar | Studies on multiphase flows | Ongoing |
| Arjun Yadav | Studies on multiphase flows | Ongoing |
| Praveenkumar S Chabbi |
Previous Students
PhD Students : Total : 05
| Name | Thesis Topic/Title | Graduated |
|---|---|---|
| Veeresh Tekure | Numerical studies on supersonic turbulent flow through a channel/cavity-type flameholder and over a blunt-body with aerospike | 2022 |
| Abhijith M S | Numerical investigation of nanofluid and MEPCM-water slurry flows through micro/mini channels using two-phase Eulerian-Eulerian model | 2021 |
| N. Satish | Numerical investigation on conjugate heat transfer analysis of turbulent forced convection flow through a rectangular channel and over a moving plate | 2020 |
| Rajesh Nimmagadda | Experimental and numerical study on the heat transfer performance of nanofluids in micro-channel and mini-enclosure | 2017 |
| R Harish | Numerical investigation of buoyancy induced turbulent flows in partially open enclosures | 2014 |
MTech Students : Total : 26
| Name | Thesis Topic/Title | Graduated |
|---|---|---|
| Siddharth Nagarajan | Numerical investigation on Thermal Management of Advanced Electronic Packages from 2.5D to 5.5D | 2025 |
| Omveer | Numerical investigation on the performance of a Car Radiator using Nanofluids | 2025 |
| Veeraraghavan Balaji | Numerical investigations of combustion-induced unstart flow in SCRAMJET inlet | 2024 |
| B Nishanth | Optimizing Chiplet Module Cooling Methods in 2.5D and 3D Packaging(Co-Advisor: Dr. Viswanath Chinthapenta) | 2024 |
| Pawar Abhishek | Numerical studies on supersonic jet impingement flow over a flat plate | 2022 |
| Albert Abraham | Numerical investigations on conjugate heat transfer analysis of turbulent jet impingement flows in a confined channel | 2021 |
| Pratik S. Pophali | Numerical investigations on Aero-thermal characteristics of the bulnt body with spike in supersonic flows | 2020 |
| Anumula Sai Pramod | Numerical investigation of fire and smoke spread in post-crash aircraft fires | 2020 |
| Maloth Ganesh | Two-Phase analysis of nanofluid flow through a channel with heat transfer | 2019 |
| Kaveenraj H | Hybrid RANS/LES of turbulent forced convection flow over tandem square cylinders | 2019 |
| Cyril Dsouza | Effect of Angle of Attack and Flow Separation Control on Scramjet Inlet using Hybrid RANS/LES | 2018 |
| Jagtap Rohit Shashikant | Large Eddy Simulation of Tunnel Fire with Blockage and Roof Vents | 2018 |
| Pawar Sumit Sanjay | Large Eddy Simulations of Supersonic Flow over a Circular Cylinder and Nozzle Flows | 2017 |
| Suhas Suresh Gaikwad | Effect of Radiation in Buoyancy induced turbulent flows in partial enclosures | 2016 |
| K Vasudeva Rao | Numerical Simulation of Turbulent channel flow at low Prandtl number | 2016 |
| Joseph Pappachan | Numerical Simulation of Orion CEV Re-entry vehicle at low altitude | 2015 |
| Shedolkar Pravinkumar | Analysis and development of fan noise prediction methodology (Main-Advisor: Prof. Venkatesham) | 2015 |
| N Satish | Numerical Simulation of Turbulent mixed convection flow with and without moving plate in a channel | 2014 |
| Anil B Wakale | Numerical Simulation of Natural convection between two immiscible fluids in channel flow(Co-Advisor: Prof. Kirti Chandra Sahu) | 2014 |
| Shashi Kumar | Numerical Simulation of Supersonic flow over a flat plate | 2014 |
| K Patel Rakeshkumar | Numerical Simulation of Orion CEV Re-entry Vehicle | 2013 |
| P Nithish Reddy | Numerical investigations on development of Scramjet propulsion system | 2013 |
| N Om Prakash Raj | Design and Analysis of Generic Hypersonic Scramjet Inlets | 2012 |
| Ravi Kumar | Numerical study on Buoyancy induced flow in enclosures connected by horizontal vents | 2012 |
| Mohan Singh | Thermal Behavior of optical fibers during the cooling stage of the drawing process | 2011 |
| Abhishek Anand | Numerical Study on Mixed convection flow of heat source modules mounted on a horizontal plate | 2011 |
Last updated on 25 July, 2025